Coronavirus: Sales counter and order collections temporarily suspended. Online orders unaffected.

Zendrive Clone

  • Model: K094


Add to Cart:
"Cut through the mix with the incomparable Zendrive. Inspired by a legendary guitarist, the Zendrive delivers blues, country, jazz and fusion tones associated with some of the finest, most costly amplifiers in the market. Four knobs control the overall volume, gain, tone and voicing of the pedal. At lower settings, the pedal offers extremely light overdrive sounds reminiscent of tube amps set near the “sweet spot.” At higher settings, the Zendrive increases in gain and sustain, producing tasty overdrive and low distortion tones."

A kit of components as recommended by Ivlark for assembly of the Hermida Zendrive stripboard project.
NOTE - these kits are not intended for beginners, so the ability to identify components and values from their markings and to transfer a pictorial layout to physical stripboard is assumed. No written instructions are provided with the kit.
Details and layout available here.

Manufacturers and product names are mentioned solely for circuit identification and comparison, and where applicable the trademarks are the property of their respective owners who are in no way associated or affiliated with Bitsbox. No cooperation or endorsement is implied.

Kit Contents:
  • Resistors:
    • 3x 1k Metal Film Resistor 0.25W 1%
    • 3x 10k Metal Film Resistor 0.25W 1%
    • 1x 470k Metal Film Resistor 0.25W 1%
    • 1x 1M Metal Film Resistor 0.25W 1%
  • Capacitors:
    • 1x 100uF 16V Electrolytic
    • 1x 47uF 25V Electrolytic
    • 1x 470nF Polyester Film
    • 1x 100nF Polybox 5mm
    • 1x 470nF Polybox 5mm
    • 1x 3.3nF Ceramic Disc
    • 1x 100pF Ceramic Disc
  • 2x 2N7000 FET
  • 3x BAT41 Schottky Diodes
  • 1x OPA2604 Dual Op Amp
  • 1x 470k lin 16mm Potentiometer
  • 1x 10k lin 16mm Potentiometer
  • 1x 47k lin 16mm Potentiometer
  • 1x 100k log 16mm Potentiometer
  • 1x 64x95mm Stripboard
  • 1x 3PDT Footswitch
  • 1x 2.1mm DC Chassis Socket
Note: Some components from the original design may have been replaced by currently available recommended substitutes - more information available via the blog here.

To complete your project you might be interested in:

Wire diecast box jack socket control knobs switch
Your IP Address is:
Copyright © 2020 Bitsbox. Powered by Zen Cart