Paul Cochrane Timmy Clone

  • Model: K090

£16.36

Add to Cart:
"A pedal of near mythic proportions, the Timmy pedal works in conjunction with your amplifier's natural tone to add anything from a mild boost to a strong overdrive without changing the overall character or architecture of your favourite amp's inherent tone."

A kit of components as recommended by Ivlark for assembly of the Paul Cochrane Timmy stripboard project (version 1).
Details and layout available here.


Manufacturers and product names are mentioned solely for circuit identification and comparison, and where applicable the trademarks are the property of their respective owners who are in no way associated or affiliated with Bitsbox. No cooperation or endorsement is implied.

Kit Contents:
  • Resistors:
    • 1x 1.5k Metal Film Resistor 0.25W 1%
    • 1x 2.2k Metal Film Resistor 0.25W 1%
    • 4x 3.3k Metal Film Resistor 0.25W 1%
    • 1x 8.2k Metal Film Resistor 0.25W 1%
    • 1x 10k Metal Film Resistor 0.25W 1%
    • 1x 510k Metal Film Resistor 0.25W 1%
    • 1x 2.2M Carbon Film Resistor 0.25W 5%
  • Capacitors:
    • 1x 47nF Polyester Film
    • 1x 10nF Polyester Film
    • 1x 39nF Polyester Film
    • 2x 1uF Multilayer Ceramic
    • 1x 100pF Ceramic Disc
    • 2x 47uF 25V Electrolytic Axial
  • 1x 4559 Dual Opamp
  • 7x 1N4148 Diode
  • 1x 64x95mm Stripboard
  • 1x 3PDT Footswitch
  • 1x 2.1mm DC Chassis Socket
  • 1x 1M log 16mm Potentiometer
  • 2x 50k log 16mm Potentiometer
  • 1x 10k log 16mm Potentiometer
  • 1x On/Off/On Toggle Switch
Note: Obsolete components may have been replaced by currently available recommended substitutes - more information available via the blog here.

To complete your project you might be interested in:

Wire diecast box jack socket control knobs switch
Your IP Address is: 34.239.158.107
Copyright © 2019 Bitsbox. Powered by Zen Cart