ST089
A successor to the HC-SR04 with reportedly improved range (around 4.5m) and accuracy. Detect the distance to objects in front of the sensor using an...
£2.09
Add:
M017
Opto-isolated 10A Change-over Relay. On-board optocoupler circuit with power and relay active led indicators. Inputs for 5Vdc supply and relay...
£2.14
Add:
M058
Input 4.75V - 40Vdc. Output 0.9V-30Vdc Power rating 6W. Output current 800mA max continuous, 1A short duration. High efficiency, high frequency buck...
£2.18
Add:
M049
I2C comms interface - address 0x48 Supply voltage 2.5V - 6Vdc. Onboard light sensor, thermistor and potentiometer connected to three ADC channels via...
£2.35
Add:
MTR8
Motor voltage range 3-12Vdc (5V-9V recommended). 70-250mA Motor & gearbox dimensions 70 x 22 x 18mm approx. 70-140 rpm approx. Torque 1kgf.cm approx....
£2.38
... more info Sold Out
M064
Double relay module. Inputs Gnd, Vcc (5Vdc), channel 1 signal (active low), channel 2 signal (active low). Channel signals are optically isolated...
£2.52
Add:
M008
In-circuit programmer for AVR microcontrollers. Linux, Mac OSX and Windows compatible. Supplied with 10-way IDC lead.
£2.53
Add:
M065
Input 4V - 38Vdc. Output 1.3V-36Vdc Constant max. output current can be varied up to 5A. 75W max. Set the output voltage off load, then set the...
£2.62
Add:
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.11
Add:
M081
4-Channel relay module. Inputs Gnd, Vcc (5Vdc), channel select signal 1-4 (active low). Channel signals are optically isolated from the relay coils....
£3.11
... more info Sold Out
M090
A panel mount dual function voltmeter and ammeter with LED display. Size: 48mm x 29mm x 22mm. Display: dual three digit 0.28" LED Operating voltage:...
£3.35
Add:
M085
Motor driver shield for Arduino - compatible with the Adafruit motor driver library. The board includes two L293D motor drivers and one 74HC595 shift...
£3.37
... more info Sold Out
M098
4-channel 16-bit ADC with I2C interface. Arduino and Python libraries available. Differential input capability. Continuous Mode: Only 150μA...
£3.50
Add:
M077
Processor - Powerful ARM 32bit Cortex-M3 72MHz CPU 64K Flash memory & 20K SRAM. 33 I/O pins. and 3.3V operating voltage. Supplied with 0.1" pitch...
£3.52
Add:
M040
BLE communication module based on the CC2541 IC. Power supply - 3.6V-6Vdc Logic level - 3.3V. For communication with Arduino boards use a simple...
£3.60
Add:
M099
Stereo amplifier with bluetooth connectivity. Operating voltage - 8-26V dc supply. Audio power output - 15W x 2 with 16V supply. Class D operation...
£3.80
Add:
M074
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 5V 16MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.95
Add:
M057
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible. This module does not have the header pins fitted (they are supplied...
£3.97
Add:
M038
Based around the ESP8266 ESP-12 and NodeMCU firmware this module provides an integrated Arduino-like hardware platform for developing wifi IoT...
£4.66
Add:
M075
8-Channel relay module. Inputs Gnd, channels 1-8 signal (active low), Vcc (5Vdc). Channel signals are optically isolated from the relay coils. Option...
£5.18
Add:
M025
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible and includes a free USB cable.
£5.26
Add:
M027
Bluetooth communications module mounted on base board for easy plug-in connection. Ideal for use in Arduino serial communication projects. Module...
£5.48
Add:
M026
Bluetooth communications module mounted on base board for easy plug-in connection and voltage regulation. Ideal for use in Arduino serial...
£5.52
Add:
M048
This clone of the Arduino Uno R3 uses a surface mount ATMega328P together with CH340G uart to handle the USB comms. 100% compatible and includes a...
£5.53
Add:
M089
RF remote control switch. Consists of receiver module with 10A changeover relay and key-fob remote control with extendable antenna and sliding cover....
£6.00
... more info Sold Out
M084
Wi-fi and Bluetooth capable development board using the ESP-WROOM-32 chip. 32-bit dual core processor. Up to 240MHz with 512kB RAM. Peripherals...
£7.26
... more info Sold Out
M009
Clone of the Arduino Uno R3. DIL socket mounted processor 100% compatible and includes a USB cable.
£7.74
Add:
M011
Connect your Arduino to the network or Internet. Includes a micro SD card slot. Note that the R3 Uno has a couple of extra ways on the female sockets...
£9.64
Add:
M080
A breakout board for the AD9833 programmable waveform generator IC. Frequency range: 0-12.5MHz Waveforms: Sine, Square, Triangle. Frequency and phase...
£10.70
Add:
M039
Clone of the Arduino Mega 2560. 100% compatible and includes a USB cable.
£11.68
Add: