M033
A low cost, accurate I2C real-time clock. with an integrated 32K AT24C32 EEPROM. Supply voltage 3.3 V to 5.5 V A coin cell battery holder allows...
£1.85
Add:
M069
PIR motion sensor with operating in the 2.7V to 12Vdc supply range. Sensitivity 3-5m with output low to high for 2 secs on detection of motion....
£1.96
Add:
M079
STM8S003F3P6 breakout board. Processor - STM8S003F3P6 16MHz 8-bit. 8K Flash memory, 1K RAM & 128 bytes EEPROM. 10-bit ADC, 3 timers, UART, SPI, I2C....
£1.24
Add:
MTR8
Motor voltage range 3-12Vdc (5V-9V recommended). 70-250mA Motor & gearbox dimensions 70 x 22 x 18mm approx. 70-140 rpm approx. Torque 1kgf.cm approx....
£2.38
... more info Sold Out
M085
Motor driver shield for Arduino - compatible with the Adafruit motor driver library. The board includes two L293D motor drivers and one 74HC595 shift...
£3.37
... more info Sold Out
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.11
Add:
M055
"Digital Tube" display module - 0.36" This module uses a two pin serial interface to accept display data to the onboard TM1637 IC. For Arduino use...
£1.58
Add:
M074
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 5V 16MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.95
Add:
PCB013
Prototyping double-sided pad board fits the Wemos D1-Mini wi-fi board headers.
£0.61
Add:
M077
Processor - Powerful ARM 32bit Cortex-M3 72MHz CPU 64K Flash memory & 20K SRAM. 33 I/O pins. and 3.3V operating voltage. Supplied with 0.1" pitch...
£3.52
Add:
M020
USB-to-Serial converter based on the CP2102 chip. For debugging, firmware updating and general serial communications. USB A plug connects to PC with...
£1.97
Add:
M062
USB-to-Serial converter based on the CP2102 chip. For debugging, firmware updating and general serial communications. Connects to PC via micro-USB...
£2.06
Add:
M035
A module for detecting moisture levels in soil. Ideal for experimenting with automatic watering systems and alarms. Consisting of a resistive...
£1.08
... more info Sold Out
M025
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible and includes a free USB cable.
£5.26
Add:
M057
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible. This module does not have the header pins fitted (they are supplied...
£3.97
Add:
M008
In-circuit programmer for AVR microcontrollers. Linux, Mac OSX and Windows compatible. Supplied with 10-way IDC lead.
£2.53
Add:
M061
Break out the Nano I/O to screw terminals. Nano pins push fit into central female headers. Board provided as a kit so soldering assembly is required....
£1.26
... more info Sold Out
M009
Clone of the Arduino Uno R3. DIL socket mounted processor 100% compatible and includes a USB cable.
£7.74
Add:
M048
This clone of the Arduino Uno R3 uses a surface mount ATMega328P together with CH340G uart to handle the USB comms. 100% compatible and includes a...
£5.53
Add:
M039
Clone of the Arduino Mega 2560. 100% compatible and includes a USB cable.
£11.68
Add:
M011
Connect your Arduino to the network or Internet. Includes a micro SD card slot. Note that the R3 Uno has a couple of extra ways on the female sockets...
£9.64
Add:
M042
Enables interaction between different logic levels in the same system e.g. send 5V logic signals to 3.3V tolerant inputs. Signals can pass in both...
£0.59
... more info Sold Out
M014
Electret microphone with comparator circuit for sound detection. Power ON and sound detected LED indicators. Digital and analogue outputs....
£1.07
Add:
ST053
Detect the distance to objects in front of the sensor using an ultrasonic ping. 5V operation suitable for use with microcontrollers, Arduino, etc. An...
£1.72
... more info Sold Out
ST089
A successor to the HC-SR04 with reportedly improved range (around 4.5m) and accuracy. Detect the distance to objects in front of the sensor using an...
£2.09
Add:
M010
433MHz RF link modules for remote control applications. Widely used in Arduino based projects. Transmitter Specs: Voltage: 3.3V to 12V Range: 20m to...
£1.70
Add:
M021
NRF24L01+ 2.4GHz Transceiver Module Data transfer up to 2Mbps. 125 Channels, Multi-point communication and frequency hopping to meet the...
£1.51
Add:
M040
BLE communication module based on the CC2541 IC. Power supply - 3.6V-6Vdc Logic level - 3.3V. For communication with Arduino boards use a simple...
£3.60
Add:
M026
Bluetooth communications module mounted on base board for easy plug-in connection and voltage regulation. Ideal for use in Arduino serial...
£5.52
Add:
M027
Bluetooth communications module mounted on base board for easy plug-in connection. Ideal for use in Arduino serial communication projects. Module...
£5.48
Add:
