K141
Micro-Tutor Uno – Arduino/Microcontroller coding and hardware activity board with prototyping area. Welcome to the world of microcontrollers! Our...
£23.28
... more info
M009
Clone of the Arduino Uno R3. DIL socket mounted processor 100% compatible and includes a USB cable.
£10.71
Add:
M048
This clone of the Arduino Uno R3 uses a surface mount ATMega328P together with CH340G uart to handle the USB comms. 100% compatible and includes a...
£9.97
Add:
M084
Wi-fi and Bluetooth capable development board using the ESP-WROOM-32 chip. 32-bit dual core processor. Up to 240MHz with 512kB RAM. Peripherals...
£7.01
Add:
M040
Bluetooth Low Energy communication module based on the CC2541 IC. Power supply - 3.6V-6Vdc Logic level - 3.3V. For communication with Arduino boards...
£6.92
Add:
M026
Bluetooth communications module mounted on base board for easy plug-in connection and voltage regulation. Ideal for use in Arduino serial...
£6.11
... more info Sold Out
M038
Based around the ESP8266 ESP-12 and NodeMCU firmware this module provides an integrated Arduino-like hardware platform for developing wifi IoT...
£5.64
Add:
M057
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible. Depending on current stock, this module may not have the header pins...
£5.00
Add:
M008
In-circuit programmer for AVR microcontrollers. Linux, Mac OSX and Windows compatible. Supplied with 10-way IDC lead.
£4.55
... more info Sold Out
M107
A 150W (max) DC-DC boost converter. Input 10-32Vdc max via screw terminals. Output 12-35Vdc @ 6A max. via screw terminals. Output voltage adjusted...
£3.99
Add:
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.77
Add:
M085
Motor driver shield for Arduino - compatible with the Adafruit motor driver library. The board includes two L293D motor drivers and one 74HC595 shift...
£3.45
Add:
M081
4-Channel relay module. Inputs Gnd, Vcc (5Vdc), channel select signal 1-4 (active low). Channel signals are optically isolated from the relay coils....
£3.11
Add:
M105
A high power, variable output, DC-DC boost converter. Input 35Vdc max via solder pads or screw terminals. Output 40V max via solder pads or screw...
£2.93
Add:
M049
I2C comms interface - address 0x48 Supply voltage 2.5V - 6Vdc. Onboard light sensor, thermistor and potentiometer connected to three ADC channels via...
£2.92
Add:
M064
Double relay module. Inputs Gnd, Vcc (5Vdc), channel 1 signal (active low), channel 2 signal (active low). Channel signals are optically isolated...
£2.83
Add:
ST071
Triaxial accelerometer and gyroscope with 6 degrees of freedom. I2C serial interface. 5Vdc supply voltage - Arduino friendly. Applications available...
£2.75
Add:
M033
A low cost, accurate I2C real-time clock. with an integrated 32K AT24C32 EEPROM. Supply voltage 3.3 V to 5.5 V A coin cell battery holder allows...
£2.65
Add:
M065
Input 8V - 36Vdc. Output 1.25V-32Vdc Constant max. output current can be varied up to 5A. 75W max. NOTE: To ensure correct current regulation and...
£2.54
Add:
MTR8
Motor voltage range 3-12Vdc (5V-9V recommended). 70-250mA Motor & gearbox dimensions 70 x 22 x 18mm approx. 70-140 rpm approx. Torque 1kgf.cm approx....
£2.46
Add:
M095
Stereo power amplifier based on the PAM8610 class-D chip. 7-15V dc supply, input impedance 15k, 4 Ohm - 8 Ohm output impedance. 15W+15W into a 4 Ohm...
£2.36
Add:
M062
USB-to-Serial converter based on the CP2102 chip. For debugging, firmware updating and general serial communications. Connects to PC via micro-USB...
£2.32
Add:
M104
A high power, variable output, DC-DC boost converter. Input 3V - 30Vdc. (5-30V for optimum operation) via solder pads. Output 35V max. Output voltage...
£2.32
Add:
ST089
A successor to the HC-SR04 with reportedly improved range (around 4.5m) and accuracy. Detect the distance to objects in front of the sensor using an...
£2.31
Add:
M017
Opto-isolated 10A Change-over Relay. On-board optocoupler circuit withrelay active led indicator. 3-way 0.1" pin header strip for 5Vdc supply and...
£2.00
Add:
M108
Dual Crystal HM10S Bluetooth Low Energy communication module based on the CC2541 IC. Surface mount module. Bluetooth version: V4.0 Connection...
£1.99
Add:
M069
PIR motion sensor with operating in the 2.7V to 12Vdc supply range. Sensitivity 3-5m with output low to high for 2 secs on detection of motion....
£1.96
Add:
M034
PIR motion sensor with high/low TTL 3.3V output signal. Sensitivity (up to 7m) and output duration (20s - 5min approx.) adjustable. 5V - 20V DC...
£1.79
Add:
M010
433MHz RF link modules for remote control applications. Widely used in Arduino based projects. Transmitter Specs: Voltage: 3.3V to 12V Range: 20m to...
£1.70
... more info Sold Out
M055
"Digital Tube" display module - 0.36" This module uses a two pin serial interface to accept display data to the onboard TM1637 IC. Customer Chris...
£1.58
Add: