MTR4
Geared Unipolar Stepper Motor with ULN2003 Driver Board. Suitable for use with the Arduino and microcontrollers - see here or here for examples....
£3.83
... more info Sold Out
MTR5
Designed for silent alarm functions, vibrational feedback, etc. Operating voltage 1.7 - 3.6Vdc. Speed@rated load - 14000rpm Current - 75mA No load...
£1.00
... more info Sold Out
MTR10
Designed for silent alarm functions, vibrational feedback, etc. Operating voltage 0.8 - 3.0Vdc. Speed@rated load - 8500rpm Current - 75mA No load...
£2.00
Add:
MTR1
Operating voltage 1.5 - 5Vdc. Rated load 10 g.cm. Speed@rated load - 5000rpm Current@rated load - 450mA. No load current - 130mA. Diameter - 24mm....
£1.46
Add:
MTR2
Operating voltage 1.5 - 5Vdc. Rated load 8 g.cm. Speed@rated load - 13000rpm Current@rated load - 1A. No load current - 350mA Diameter - 20mm. Body...
£1.00
Add:
M088
2-channel H-bridge motor driver board able to drive two independent motors at up to 800mA each. Can also drive a single four line two phase stepper...
£1.19
Add:
HW072
Pulley wheel suitable for 2mm shaft
£0.38
Add:
HW073
Pulley wheel suitable for 2mm shaft
£0.38
Add:
HW074
Pulley wheel suitable for 2mm shaft
£0.56
Add:
HW149
A 34-piece assortment of gears, pulleys, racks, belts, etc. Axle hole sizes range from 2mm to 2.5mm.
£2.81
... more info Sold Out
HW161
A miniature propeller with 4 flexible blades. Suitable for miniature motors with 2mm diameter shafts. 53mm diameter 9.5mm deep.
£0.38
Add:
MTR8
Motor voltage range 3-12Vdc (5V-9V recommended). 70-250mA Motor & gearbox dimensions 70 x 22 x 18mm approx. 70-140 rpm approx. Torque 1kgf.cm approx....
£2.38
... more info Sold Out
MTR9
A kit of parts to build a 3-wheel buggy. Add an Arduino, Raspberry Pi, ultrasonic range sensor, etc, etc. for a robotic car project. Kit contents:...
£9.98
Add:
MTR11
SG90 Digital servo compatible with Arduino servo library. Comes with a selection of linkage arms. Voltage: 4.8V-6.0V Weight: 9g Size: 32 x 12 x 30mm...
£3.78
Add:
MTR12
Continuous Digital servo compatible with Arduino servo library. Comes with a selection of linkage arms. Voltage: 4.8V-6.0V Weight: 9g Size: 32 x 12 x...
£3.77
... more info Sold Out
MTR7
High torque, metal gear servo compatible with Arduino servo library. Comes with a selection of linkage arms. 4.5V-6.5V operation. Ideal for...
£4.99
Add:
HW106
Steel rod/shaft - ideal for use with pulleys, gears, wheels etc. Easily cut to length required.
£0.13
Add: