CN398
Sprung hook for connection to component legs. Overall length is 40mm. 50V max.
£0.37
Add:
CN081
Panel mount. 15 Amp rated. For test equipment, power supplies, loudspeaker connection, etc. Accepts 4mm banana plug. Height:- 24-32mm above panel....
£1.22
Add:
CN064
Panel Mount Accepts 4mm banana plug.
£0.60
Add:
CN317
Stainless steel sprung contact. 36A 60V rated.
£1.15
Add:
CN193
Panel mount. 15 Amp rated. For test equipment, power supplies, loudspeaker connection, etc. Accepts 4mm banana plug. Height:- 24-32mm above panel....
£1.13
Add:
CN393
Panel Mount Accepts 4mm banana plug.
£0.58
Add:
CN375
Stainless steel sprung contact. 36A 60V rated.
£1.97
Add:
CN262
50mm long with a choice of screw, crimp or 4mm banana plug connection.
£0.31
... more info Sold Out
CN329
83mm x 55mm, 400 tie points: 30 columns in 2 banks of 5 plus 4 rows of 25. Self-adhesive pad on the base.
£1.51
Add:
CN013
80mm x 60mm, 390 tie points: 29 columns in 2 banks of 5 plus 4 rows of 25. Multiple boards can be locked together for larger prototyping areas.
£11.00
Add:
CN452
46mm x 36mm, 170 tie points. A mini breadboard suitable for small circuit prototyping. Self adhesive backing pad and twin screw holes allow permanent...
£0.86
Add:
CN338
46mm x 36mm, 170 tie points. A mini breadboard suitable for small circuit prototyping. Self adhesive backing pad and twin screw holes allow permanent...
£0.80
Add:
CN340
46mm x 36mm, 170 tie points. A mini breadboard suitable for small circuit prototyping. Self adhesive backing pad and twin screw holes allow permanent...
£0.86
Add:
CN453
46mm x 36mm, 170 tie points. A mini breadboard suitable for small circuit prototyping. Self adhesive backing pad and twin screw holes allow permanent...
£0.86
Add:
CN049
Sprung hook for connection to component legs. Overall length is 57mm. 50V max.
£0.59
Add:
CN008
Overall length 35mm including insulating boot.
£0.20
Add:
CN183
Sprung hook for connection to component legs. Overall length is 40mm. 50V max.
£0.35
Add:
CN274
Panel mount. 30Vac 60Vdc 19A max. Height 23mm above the panel. Accepts 4mm banana plug.
£0.82
Add:
CN256
Panel Mount - plastic bezel splits to provide isolation with metal panels. 7.7mm mounting hole. Accepts 4mm banana plug.
£0.25
Add:
CN079
Panel mount. 15 Amp rated. For test equipment, power supplies, loudspeaker connection, etc. Accepts 4mm banana plug. Height:- 24-32mm above panel....
£1.34
Add:
CN023
Panel Mount Accepts 4mm banana plug. Requires 8mm mounting hole.
£0.79
Add:
CN011
Stainless steel sprung contact. 36A 60V rated.
£1.01
Add:
CN469
T-shaped 40-pin breadboard adaptor plate for Raspberry Pi. Connect the Pi 40-pin I/O port to a breadboard for prototyping. The board is marked with...
£1.53
Add:
CN416
Male/male. A set of 40 jumpers for connection between sockets. Supplied joined together in a peel apart strip. Length 10cm
£1.55
Add:
CN279
Male/male. A set of 40 jumpers for connection between sockets. Supplied joined together in a peel apart strip. Length 20cm
£2.00
Add:
CN429
Male/female. A set of 40 jumpers for connection between header pins and a breadboard. Supplied joined together in a peel apart strip. Length 10cm
£1.60
Add:
CN272
Male/female. A set of 40 jumpers for connection between header pins and a breadboard. Supplied joined together in a peel apart strip. Length 20cm
£1.68
Add:
CN521
Male/male. A set of 140 pre-formed, U-shaped jumper wires for use with all of our breadboards. 13 different lengths of cut and stripped 22AWG...
£3.33
Add:
CN397
Sprung hook for connection to component legs. Overall length is 40mm. 50V max.
£0.36
Add:
