PCB010
A PCB for creation of a customised, barebones, Arduino-compatible control module. This board, now in version 2.0, dispenses with the USB interface...
£1.60
Add:
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.11
Add:
M074
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 5V 16MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.49
Add:
M076
Clone of the Arduino Pro Mini fitted with an ATMega168 microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low...
£2.48
Add:
M094
Pro Mini alternative. Based around the 20-pin version of the LogicGreen LGT8F328P microcontroller, which is 99% compatible with the ATMega328P and...
£1.34
Add:
M025
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible and includes a free USB cable.
£5.52
Add:
M057
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible. This module does not have the header pins fitted (they are supplied...
£3.67
Add:
M092
Based around the LogicGreen LGT8F328P microcontroller, which is 99% compatible with the ATMega328P and includes additional features such as ADC...
£2.48
Add:
M061
Break out the Nano I/O to screw terminals. Nano pins push fit into central female headers. Board provided as a kit so soldering assembly is required....
£1.26
Add:
M009
Clone of the Arduino Uno R3. DIL socket mounted processor 100% compatible and includes a USB cable.
£7.61
Add:
M048
This clone of the Arduino Uno R3 uses a surface mount ATMega328P together with CH340G uart to handle the USB comms. 100% compatible and includes a...
£5.57
Add:
M052
Prototyping shield supplied with mini-breadboard. Two general purpose LEDs, push switch and reset button on board. Suitable for circuit prototyping...
£1.55
Add:
M039
Clone of the Arduino Mega 2560. 100% compatible and includes a USB cable.
£10.93
Add:
M072
Ethernet network adaptor module based on the ENC28J60 chip. SPI interface. 3.3V supply. Arduino compatible using a variety of available libraries...
£4.33
Add:
M011
Connect your Arduino to the network or Internet. Includes a micro SD card slot. Note that the R3 Uno has a couple of extra ways on the female sockets...
£9.64
Add:
M042
Enables interaction between different logic levels in the same system e.g. send 5V logic signals to 3.3V tolerant inputs. Signals can pass in both...
£0.59
Add:
