'duino & Arduino Compatible

'duino & Arduino Compatible Modules


Modules based on the Arduino open source hardware designs.
Barebones 'Duino PCB 2.0
PCB010

Barebones 'Duino PCB 2.0

A PCB for creation of a customised, barebones, Arduino-compatible control module. This board, now in version 2.0, dispenses with the USB interface...
£1.60
Add:
Pro Mini ATMega328P 3.3V 8MHz
M071

Pro Mini ATMega328P 3.3V 8MHz

Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.11
Add:
Pro Mini ATMega328P 5V 16MHz
M074

Pro Mini ATMega328P 5V 16MHz

Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 5V 16MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.42
Add:
Pro Mini ATMega168 3.3V 8MHz
M076

Pro Mini ATMega168 3.3V 8MHz

Clone of the Arduino Pro Mini fitted with an ATMega168 microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low...
£2.48
Add:
Pro Mini ATMega168 5V 16MHz
M046

Pro Mini ATMega168 5V 16MHz

Clone of the Arduino Pro Mini fitted with an ATMega168 microcontroller operating at 5V 16MHz. 100% compatible. The Pro Mini was designed as a low...
£3.10
Add:
Nano 3.0 Clone
M025

Nano 3.0 Clone

Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible and includes a free USB cable. Note: Header pins are supplied but may...
£4.55
Add:
Nano 3.0 Clone Basic
M057

Nano 3.0 Clone Basic

Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible. This module does not have the header pins fitted (they are supplied...
£3.40
Add:
Nano Expansion Breakout Board
M061

Nano Expansion Breakout Board

Break out the Nano I/O to screw terminals. Nano pins push fit into central female headers. Board provided as a kit so soldering assembly is required....
£1.17
Add:
Uno R3 Clone
M009

Uno R3 Clone

Clone of the Arduino Uno R3. DIL socket mounted processor 100% compatible and includes a USB cable.
£7.61
Add:
BB_Duino Uno R3 - ATMega328P
M048

BB_Duino Uno R3 - ATMega328P

This clone of the Arduino Uno R3 uses a surface mount ATMega328P together with CH340G uart to handle the USB comms. 100% compatible and includes a...
£5.82
Add:
UNO Prototyping Shield
M052

UNO Prototyping Shield

Prototyping shield supplied with mini-breadboard. Two general purpose LEDs, push switch and reset button on board. Suitable for circuit prototyping...
£1.58
Add:
MEGA 2560 - Arduino Mega Clone
M039

MEGA 2560 - Arduino Mega Clone

Clone of the Arduino Mega 2560. 100% compatible and includes a USB cable.
£10.43
Add:
ENC28J60 Ethernet Module
M072

ENC28J60 Ethernet Module

Ethernet network adaptor module based on the ENC28J60 chip. SPI interface. 3.3V supply. Arduino compatible using a variety of available libraries...
£4.58
Add:
Ethernet Shield with micro-SD Card Slot
M011

Ethernet Shield with micro-SD Card Slot

Connect your Arduino to the network or Internet. Includes a micro SD card slot. Note that the R3 Uno has a couple of extra ways on the female sockets...
£11.21
Add:
4-Channel Bi-directional Logic Level Shifter
M042

4-Channel Bi-directional Logic Level Shifter

Enables interaction between different logic levels in the same system e.g. send 5V logic signals to 3.3V tolerant inputs. Signals can pass in both...
£0.59
Add:

Featured Products - Semiconductors

Your IP Address is: 54.227.21.188
Copyright © 2018 Bitsbox. Powered by Zen Cart